3.
On a firm surface, using a piece of cardboard for a pad,
stand the axle on one end. Hammer an end cap onto the
axle. The end cap should lock firmly.
4.
Slide the following parts, in this order, onto the axle: one
wheel, one washer, and two axle mounts. (Figure 1.)
n
Do Not
install the second end cap without first inserting the
axle mounts into the sockets. The sockets prevent the axles
from being positioned too close together.
Figure 1
Axle
Mount
Axle
Wheel
end
cap
Washer
Washer
9476 Assembly and Setup Instructions
1-4
Summary of Contents for Mobile Printing Station Monarch 9476
Page 54: ...9476 Assembly and Setup Instructions 3 4 ...
Page 60: ...9476 Assembly and Setup Instructions 4 6 ...
Page 63: ......
