Robot does not work
Robot does not
climb wall
Plug power cord and cable line
Contact local vendor
Contact local vendor
Check the impeller or driving system
Contact a local distributor
ůĞĂŶƚŚĞĮů
ter basket
Replace new roller
Rollers are worn or
consumed too much
Filter basket need to clean
Been blocked
Electric fault
Cleaner does not match
local rated voltage
Damaged during
Power cord not
connected well
The robot pool
cleaner does not go
pool
It just sits at the
and won’t move
1. Did not get the air out of the
machine.
2. The sponge brushes are not
totally soaked.
3. The cleaner is not turned on."
1. Check if the LED on power
ƐƵƉƉůLJŇĂƐŚĞƐ͕ŝĨ
y
ĞƐ͕ŝƚŵ
ay
because it scheduled for 1 hour
and has completed cleaning. ( The
2. There is a blockag
ĞŝŶƚŚĞĮů
ter
basket.
3. The belt is broken.
ϰ͘/ĨƚŚĞďĞůƚŝƐĮŶĞ͕ƚŚĞ
re may be
something wrong with the motor
͕
in this case contact with our
customer service for help.
1. Hold the top handle make sure
to empty the tr
ĂƉƉĞĚĂŝƌŝŶƐŝĚĞ͕
then the cleaner can immerse
int
ŽƚŚĞƉŽŽůŇŽŽ
r.
2. Soak the machine into the
water for about 1-2 hour and we
suggest manually knead the
sponge brushes to accelerate the
totally soak
ĞĚ͕ƉƵƚƚŚĞĐůĞĂŶĞƌ
into the water
͕ƚŚĞŶƚƵƌŶŽŶƚŚĞ
power supply
͕ŝƚǁŝůů
go to the
hour
͕ϮŚŽƵ
rs or 3 hours.
Ϯ͘ůĞĂŶƵƉƚŚĞĮů
ter basket and
restart the machine.
3. Replace belts. (Tips: Please
don't use the cleaner immediately
will cause belts broken easily.)
It seems to spend
deep area without
area
The pool is not standard r
ŽƵŶĚ͕
oval of rectang
Ğů͕ďƵƚ
rather free
formed.
in the package) on the shell
surface to increase the clean
coverage.
