AN1181-US
Net2
5
Door Widths
Notes will need to be taken on the door thicknesses across a potential site, this information will be required
when ordering the PaxLock Mortise.
•
Out of the box the PaxLock Mortise will work with 1 ¹/₂" - 1 ³/₄" door widths.
•
Before installing a PaxLock Mortise on a unit that is 1 ³/₈" - 1¹³/₃₂", both the spindle and through
door bolts will need to be cut down to the correct length as per the drilling template.
•
For door widths of 1²⁹/₃₂" - 2 ¹/₈" or 2¹³/₆₄" - 2¹³/₃₂", a separate Wide Door kit will need to be purchased.
Once you are happy the site is suitable for the PaxLock Mortise you will need to ensure you have the right
information to order the correct products.
There are 4 sales codes to chose from for PaxLock Mortise. You’ll need to know if you prefer the Galaxy or
Eclipse handle as well as if you would like the black or white fascia.
The supplied template <
> should be used to check that the holes in the door are in the
right location and correctly sized for the Net2 PaxLock Mortise.
When passing the PaxLock Mortise through the door during installation, the unit must sit completely flush
against the face of the door. If this is not the case the holes in the door may need adjusting.
Ordering the right equipment
During installation
