Beadboard Wall Bookcase
Note:
The maximum load for each shelf is 30lbs.This hanging system is meant for drywall/wood stud
mounting only. If walls are concrete, brick or plaster, please consult your local hardware store for
assistance. For safety and ease of mounting, installation is recommended using two adult people.
ASSEMBLY PARTS INCLUDED:
TOOLS REQUIRED FOR ASSEMBLY OF BOOKCASE (NOT INCLUDED):
•
Phillips
screwdriver
ASSEMBLY INSTRUCTIONS:
1. Place (8) Wooden Dowels (G) into the pre-drilled holes on the Left Frame (A). (Figure #1)
2. Using a Phillips head screwdriver, screw (8) Long Cam screws (H) into the pre-drilled holes on the
Left Frame. (Figure #1)
3. Insert (8) Cam Cases (I) into the large holes on the lower edge of each shelf, ensuring the arrow seen
on the top of the cam case is pointing towards the opening on the bottom edge of the shelf. (Figure #2)
4. Insert Top shelf (C), Middle Shelf (D), Middle Shelf (E) and Bottom Shelf (F) into the Left Frame (A)
ensuring the wood dowels and cam screws insert into their corresponding holes as shown. (Figure #3)
5. Using a Phillips head screwdriver, tighten all the Cam Cases (I) by turning clockwise until tight. Do not
over tighten.
6. Press the Plastic Covers (J) onto the Cam Cases (I)
