Page
1
of
2
Emerson Full Bed
Assembly Instructions
•
Please read all instructions before beginning assembly.
•
For your safety and convenience, assembly by three people is recommended.
•
Remove all parts and hardware from packaging and identify by comparing to lists below. Do not discard any contents until
assembly is complete to avoid discarding any parts or hardware.
TOOLS:
(1) Open spanner Phillips screwdriver
（
not included
）
PARTS:
(1) Headboard –A (1) Footboard- B (2) Side rail - C (1) Slat roll- D
HARDWARE:
(8) Bolt (
Ø5/16”x 3.5”
) -E (8) Nut (
Ø5/16”
) -F (8) Spring Washer (
Ø
5/16
"
) - G (8) Flat Washers (
Ø5
/16
"
) –H
(6) Wood screw (
Ø3/16 x 1”L
) -I
Assembly Instructions:
1.
Carefully lay headboard (A) and side rail (B) on a carpet or scratch-free surface.
2.
Turn bolts (E) into the threaded holes on metal plate of headboard (A). Align the bolts with the holes on end of side rail (C),
let the bolts pass though the holes of side rail, followed with flat washer (H), spring washer (G), nut (F), tighten by open
spanner provided. Repeat this process with another side rail (C).
Fig. 1
Fig.1
