- 2 -
www.pbteen.com
Assembly Instructions:
1. Place the bed (A) upside down on a clean, soft surface such as a carpet or rug.
2. Attach the caster (e & f) to the bracket of bed as shown, using flat washer (c), lock washer (b) and big bolt (a) .
Securely tighten the bolt with Allen wrench (
4
mm). Do not over tighten the bolt. See Figure 1.
a
b
c
Allen Wrench
e
e
f
f
A
3. Attach the support leg (B) to the center of bed as shown, using small bolt (d). Securely tighten the bolt with
Allen wrench (
5
mm). Do not over tighten the bolt. See Figure 2.
Allen Wrench
d
B
A
Figure 1
Figure 2
