- 1 -
www.pbteen.com
Locker Desk
Pre-Assembly:
Please read all instructions before beginning assembly.
Two-adult assembly is recommended.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
If using power tools to aid in assembly please use with caution. Power tools can damage hardware.
Note: Do not full tighten all bolts until all parts are in place. Failure to follow these instructions may cause the
bolts to misalign during assembly.
TOOLS REQUIRED:
Open Wrench
PARTS INCLUDED:
A
– Desk – 1pc
HARDWARE LIST:
a
– Caster without Brake – 2pcs b – Caster with Brake – 2pcs
Note:
All parts and hardware are delivered in one carton.
Assembly Instructions:
1. The handle is pre-assembled on the interior of the drawer. Use a Phillips head screwdriver to unscrew and
remove the handle and washers from drawer, then reattach the washer and handle to the drawer as shown.
See Figure 1.
