Rev: 18.Dec.2012
2
of
5
IMPORTANT SAFETY INSTRUCTIONS:
•
Please read all all instructions carefully before assembling.
•
For your safety, assembly by two or more adults is strongly recommended.
•
Keep instructions for future use.
•
Use only vendor-supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
PRE- ASSEMBLY:
•
Remove all parts and hardware from the box and place them on a carpeted or scratch-free work surface.
The shipping box provides an ideal work surface.
•
To avoid accidentally discarding small parts or hardware, please do not dispose of any contents until
assembly is complete.
•
For your safety and ease of assembly, two people are recommended to assemble this item.
•
Prior to starting the assembly, use the parts and hardware lists to identify and separate each of the pieces
included.
•
The illustrations provided allow for easier assembly when used in conjunction with the assembly
instructions.
•
Note: Do not fully tighten any of the bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.
•
Please use caution if using power tools to aid in assembly. Power tools can damage hardware or split the
wood.
PARTS INCLUDEED:
A
–Long side rail (x2)
B
– Short side rail (x2)
C
– Side bottom rail with protruding
edge (x2)
D
– Middle bottom rail with sunken
edge (x1)
E
– Bottom board support (x2)
HARDWARE INCLUDED:
F
– Ball Tip Allen Key G – Hex Bolt H –Barrel Nut I –Pan Head Screw J- Pan Head Screw
F
G
H
I
J
(included)
1/4
”x63x13mm
1/4
”x11x10mm
8x38mm
8x25mm
1 pc
8 pcs
8 pcs
12 pcs
10 pcs
