8
Figure 2.7 - Add key, adding of the electronic key to the Pit zone device
2.2.2
How to delete electronic keys from the Pit zone device
In case of a loss of the electronic keys or the necessity to remove the electronic keys from the Pit zone
device, follow the instructions below:
1. Turn the Pit zone device around and unscrew the 4 screws and take the lid off.
2. Push and hold the Add key button (see Fig. 2.7). During this time the ‘Lock’ status indicator will blink
every two seconds.
3. After 20 seconds the ‘Lock’ status indicator will be lit, which means that all electronic keys have been
deleted from the Pit zone device and that you can let go of the Add Key button.
4. In order to add new electronic keys to the device see chapter 2.2.1 from point 3 to 5.
2.3.
Remote control
The remote control (see Fig. 2.8) is powered by two AA batteries and performs the same functions as the
buttons in the software, description in chapter 4.1. When pressing any button on the remote control a
green light ignites which is located above the Reverse Points button.