2
CropCare
®
would like to thank you for choosing to purchase our model F2500 turf foam marker system. We appreciate your
business and want to personally fill all of your equipment and sprayer needs. We also desire to provide you with the technical support
and needed parts that will allow you to continue using your turf foam marker without disruption. For parts and service, please contact
an authorized CropCare
®
dealer.
Table Of Contents
•
Be aware of all safety guidelines, warnings, and cautions including those of the sprayer, no-till planter, or any
other piece of equipment that the turf foam marker may be mounted on.
•
Read and understand the warnings and instructions of the foam concentrate that you are using.
•
Always use an approved foam concentrate.
•
Ensure that you have a power source that meets the requirements of 12 volt DC and 15 amps.
Before You Begin
Please read and understand this manual and its instructions and warnings completely before operating
the turf foam marker.
Identification of Machine ...................................................................2
Specifications ..........................................................................................2
Before You Begin ....................................................................................2
Safety Precautions.................................................................................3
General Guidelines .....................................................................3
Mounting the Turf Foam Marker ......................................................3
Turf Foam Marker Unit ..............................................................4
Wiring Harness ............................................................................4
Discharge Tubes ..........................................................................5
Discharge Hose ...........................................................................5
Operating Instructions ........................................................................5
Maintenance Instructions ..................................................................6
Routine Maintenance ................................................................6
Winterizing your Turf Foam Marker .....................................7
Troubleshooting .........................................................................7
Breakdowns & Parts Lists ....................................................................8
F2500 Breakdown .......................................................................8
F2500 Parts List ...........................................................................9
Decal List .......................................................................................9
CM40 Compressor Breakdown ........................................... 10
F2504 Discharge Tube Breakdown...................................10
CropCare
®
Limited Warranty ....................................................... 11
Contact Us ............................................................................................. 12
Ordering Parts ........................................................................... 12
Specifications
Tank Capacity .......................................................................2.5 gallons
Power usage ................................7 amp draw / 15 amp start load
Min power supply ...................................................12 volt / 15 amp
Max continuous run time ........................................................90 min
Max boom length ...............................................................................30’
2.5 gallon Turf Foam Marker
Wiring Harness .........................................................................................
16’ length
Shipping weight ......................................................................................
17 lbs
Identification of Machine
•
Model #’s: F2500
•
The model number and revision identification decal is located on foam marker frame beside compressor.
