18
Configure IP address Manually:
Step 5:
Select
Use the following IP address
&
Use the following DNS server
addresses
.
IP address:
Fill in IP address 192.168.1.x. (
x
is a number between 3 to 254).
Subnet Mask:
Default value is 255.255.255.0.
USB interface
Default gateway:
Default value is 192.168.1.
2
.
Ethernet interface
Default gateway:
Default value is 192.168.1.
1
Preferred DNS server:
Fill in preferred DNS server IP address.
Alternate DNS server:
Fill in alternate DNS server IP address.
You can use ping command under DOS prompt to check if you have setup TCP/IP
protocol correctly and if you computer has successfully connected to this router.
For example, USB interface ping to the gateway
* Type ping
192.168.1.2
under DOS prompt and the following message will appear:
Pinging 192.168.1.2 with 32 bytes of data:
Reply from 192.168.1.2: bytes=32 times<1ms TTL=64
Reply from 192.168.1.2: bytes=32 times<1ms TTL=64
Reply from 192.168.1.2: bytes=32 times<1ms TTL=64
Reply from 192.168.1.2: bytes=32 times<1ms TTL=64
