PAGE 8
SENSO
RS AN
D INS
TRUME
N
TATIO
N F
OR MAC
HINE
CON
DITION M
ONIT
ORIN
G
Ordering Information
IMI Part Number:
684A
0 1
Basic Model Number
684A
Enclosure Type
1
8x14x16 in. with BNC Holes
4
8x14x16 in. without BNC Holes
Number of Channels
1
One Panel Meter Cutout
2 Two Panel Meter Cutouts
3 Three Panel Meter Cutouts
4
Four Panel Meter Cutouts
5
Five Panel Meter Cutouts
6
Six Panel Meter Cutouts
7
Seven Panel Meter Cutouts
8
Eight Panel Meter Cutouts
Notes:
1) When only 1 meter is ordered, 6 cord grips are installed (1 Power, 5 Signal). Blanks will occupy 35 holes.
2) When 2 meters are ordered, 11cord grips are installed (1 Power, 10 Signal). Blanks will occupy 30 holes.
3) When 3 meters are ordered, 16 cord grips are installed (1 Power, 15 Signal). Blanks will occupy 25 holes.
4) When 4 meters are ordered, 21 cord grips are installed (1 Power, 20 Signal). Blanks will occupy 20 holes.
5) When 5 meters are ordered, 26 cord grips are installed (1 Power, 25 Signal). Blanks will occupy 15 holes.
6) When 6 meters are ordered, 31 cord grips are installed (1 Power, 30 Signal). Blanks will occupy 10 holes.
7) When 7 meters are ordered, 36 cord grips are installed (1 Power, 35 Signal). Blanks will occupy 5 holes.
8) When 8 meters are ordered, all cord grips are installed (1 Power, 40 Signal).
9) When a Model 683A0XXXXX Series Panel Meter is installed into a Model 684A1X Enclosure the BNC
hole will be populated with a Blank.
10) When a Model 683A1XXXXX Series Panel Meter is installed into a Model 684A1X Enclosure the BNC
hole will be populated with an off-ground BNC Jack.
11) All Enclosures come equipped with the correct number of terminal blocks and cord grip holes to
accommodate 8 Meters.
Example:
Part Number: 684A02
6x8x10 Enclosure with 2 Meter/Controller cutouts and 2 BNC holes. One cord grip installed for Power cabling and
10 cord grips installed for Signal cabling. Five remaining cord grip holes are occupied by blanks
Summary of Contents for IMI SENSORS 684a16
Page 17: ......