Model Number
1402-12ADB
FATIGUE RATED LOW PROFILE LOAD CELL, DUAL BRIDGE
Revision: NR
ECN #: 43387
Performance
ENGLISH
SI
Measurement Range(100 x 10^6 cycles)
12.5 klb
56 kN
[5][6]
Sensitivity(± 10 %)
2.0 mV/V
2.0 mV/V
[7][1]
Non-Linearity
≤ 0.05 % FS
≤ 0.05 % FS
Hysteresis
≤ 0.05 % FS
≤ 0.05 % FS
Non-Repeatability
≤ 0.02 %RO
≤ 0.02 %RO
Eccentric Load Sensitivity
0.1 %/in
0.1 %/25.4mm
Resonant Frequency
12 kHz
12 kHz
Side Load Sensitivity
0.1 %/in
0.1 %/25.4mm
Creep(in 20 minutes)
0.025 %
0.025 %
Static Error Band
≤ 0.05 % FS
≤ 0.05 % FS
[5]
Environmental
Overload Limit
37.5 klb
167 kN
Load Limit(Side Force, F
X
or F
Y
)
10 klb
44 kN
[3]
Load Limit
(Bending Moment, M
X
or M
Y
)
10k in-lb
1130 Nm
[3]
Load Limit
(Axial Torque, M
Z
)
10k in-lb
1130 Nm
[3]
Temperature Range(Operating)
-65 to +200 °F
-54 to +93 °C
Temperature Range
(Compensated)
+15 to +115 °F
-9 to +46 °C
Temperature Effect on Output(Maximum)
± 0.0008 %Reading/°F
± 0.0018 %Reading/°C
[4]
Temperature Effect on Zero Balance(Maximum)
± 0.0008 %FS/°F
± 0.0018 %FS/°C
[4]
Electrical
Bridge Resistance
350 Ohm
350 Ohm
[1]
Excitation Voltage(Recommended)
10 VDC
10 VDC
[2]
Insulation Resistance
>5k GOhm
>5k GOhm
Zero Balance
≤ 1 %RO
≤ 1 %RO
Output Polarity
+Tension
+Tension
Physical
Size (Diameter x Height)
6.06 in x 3.50 in
153.90 mm x 88.90 mm
[8]
Weight
21 lb
4.53 kg
Mounting Thread
1-14 UNS-3B
No Metric Equivalent
Sensing Element
Strain Gage
Strain Gage
Mounting Torque
1400 in-lb
158 Nm
Deflection at Full Scale Capacity
0.001 in
0.03 mm
Electrical Connector
PT02E-10-6P (2)
PT02E-10-6P (2)
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
NOTES:
[1]Nominal.
[2]Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[3]Singularly applied, i.e. no other extraneous loads.
[4]Over compensated operating temperature range.
[5]FS - Full Scale.
[6]Calibrated in tension and compression.
[7]RO - Rated Output.
[8]See Outline Drawing 60059 for Complete Dimensions
OPTIONAL ACCESSORIES:
Model 084A90 Connector Shroud (2)
Model 181-012A PT06A-10-6S(SR)
Model 8311-01-10A CABLE
PCB Load & Torque, Inc.
24350 Indoplex Circle
Farmington Hills, MI 48335
UNITED STATES
Phone: 866-684-7107
Fax: 716-684-0987
E-Mail: ltinfo@pcbloadtorque.com
Web site:
http://www.pcbloadtorque.com
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard
model except where noted below. More than one option may be used.
Entered: AP
Engineer: PE
Sales: RWM
Approved: JSD
Spec Number:
Date: 10/3/2014
Date: 10/3/2014
Date: 10/3/2014
Date: 10/3/2014
60060
