(800) 348 9250
pcbunlimited.com
(800) 348 9250
pcbunlimited.com
support@pcbunlimited.com
Machine location:
Do not use the printer outdoors! The
printer is developed to be installed on a
flat, dry surface. This surface or table
must be capable of carrying a weight of at
least 10 Kg (ex. The force used to spread
the paste). The printer should be used
with room temperatures between 15 and
25 degrees Celsius.
Use the printer only in well ventilated
rooms.
During the printing the flux will
release some gasses. These gasses relea
-
sed by the flux can be unhealthy,
please
follow the safety instructions of your
paste supplier.
IMPORTANT SAFETY
INSTRUCTIONS
SP1260 M1 STENCIL PRINTER
USER MANUAL. VERSION 2.10
Introduction
Normal use:
The printer is developed for printing paste on PCBs only. Do not use the printer for printing
on food, animals or any other materials. You will void your warranty if you do not ignore these
instructions.
When used for anything other than printing paste on PCBs you will void
your warranty!
Remark
Pictures in this manual could be different than the actual model you purchased.
They are meant to explain the printers’ use and function.
The SP1260 M1 is designed to put soldering paste on PBC’s with a “stencil”. A
stencil is a thin metal plate which has holes on the same position as where the pads on the
PCB are located.
Unlike other brands of stencil printers, the SP1260 M1 has unique features for user friendly
handling of stencils and PCB’s.
