Noise floor A weighting : 30dB or less
C weighting : 32dB or less
Linearity range : 60dB
Reference level range : 60 to 120dB
Reference sound pressure level : 94dB
Calibration check frequency : 1KHz
Level range selection :
6 ranges in 10dB steps 20 to 80dB ,
30 to 90dB
40 to 100dB , 50 to 110dB
60 to 120dB , 70 to 130dB
Frequency range :
Overall characteristics including microphone : 31.5 to
8000Hz
Frequency weighting : A, C
Time weighting (RMS detection) : Fast, slow
Calibration : Calibration using sound calibrator
Sampling interval
Bar graph indication : 125mS approx.
Numeric indication : 1 sec approx.
Data memory functions
Data can be stored in the internal memory.
Max. 99 data sets for L with elapsed time, Lmax with
elapsed time and Lmin with elapsed time con be stored.
Microphone : 1/2-inch electret condenser type
Display LCD
Display screens :
4 digits indication of sound level, 0.1dB resolution.
Bar graph indication of current sound level, 1dB resolution.
Elapsed time display, 100 hours maximum.
Memory and read address display, 99 data sets maximum.
-4-
Warning indications
Over-range indication
OV
displayed at upper limit of the range
Un
displayed at lower limit of the range
Outputs
AC output (using selected frequency weighting)
Output voltage : 1Vrms (at full-scale of the range)
Output impedance : 5K
Ω
Load impedance :
≧
1M
Ω
DC output
Output voltage : 10mV/1dB
Output impedance : 5K
Ω
Load impedance :
≧
1M
Ω
Power requirements
One 9V battery (006P or IEC6F22)
Battery life : Approx. 25 hours
AC adaptor (option)
Current rating (when 9V DC is input) : Approx. 10mA
Ambient conditions
Operating ambient conditions : -10°C to +50°C,
30% to 90%RH non-condensing
Storage ambient conditions : -10°C to +60°C,
<70%RH non-condensing
Dimensions : Approx. 264(L)
×
68(W)
×
27(H) mm
Weight (including battery) : Approx. 260g
Supplied accessories : Battery 9V, Wind shield, Screwdrive
(adjustment), 3.5
φ
plug (3pin AC/DC output), Carrying case,
Instruction manual
Optional equipment
AC adaptor, Sound calibrator TES-1356
-5-
