Manual
9
5.5
Accumulation function
To activate the accumulation function, press the ACCU button on the remote control. The display now
shows the following:
1. [No***]
how many readings have been added to the sum
2. [H****]
the first 4 digits of the sum
3. [L****]
the last 4 digits of the sum
The current reading has been added to the sum.
After the values above have been displayed twice, the scale returns to normal weighing mode. You can
also press SHIFT to return to normal weighing mode.
To display the current values of the accumulation function, press SHIFT and ACCU on the remote at the
same time. The display now shows the following:
1. [No***]
how many readings have been added to the sum
2. [*****]
current reading
3. [H****]
the first 4 digits of the sum
4. [L****]
the last 4 digits of the sum
You can navigate between the individual accumulations by using TARE and ZERO on the remote control.
Press SHIFT to return to normal weighing mode.
If you want to deactivate the accumulation function (all accumulation data will be deleted), press the CLR
button on the remote control. The display now shows [ Clr ]. Press SHIFT to confirm the deletion or
press CLR to cancel it.
5.6
Battery voltage
Press SHIFT and F1 on the remote at the same time to show the battery voltage. The display now shows
the current battery voltage [U 6.XX]. To return to normal weighing mode, press SHIFT.
Note: If the display starts to blink, the battery voltage is low. Please recharge the battery.
5.7
Brightness
To adjust the brightness of the display, press F1 on the remote control. There are 5 different options, from
dark (1) to bright (5). Option 3 is set by default.
5.8
Measuring unit
You can switch between kg and lb. To do so, press SHIFT and HOLD on the remote at the same time.
The current measuring unit is displayed right next to the display.
