3
1.2.3
Intended Use
- Safe operation is only guaranteed when scope is intended used according to the
instruction manual.
-
The use and maintenance of the device must always be in accordance with national
provisions
.
- The device is used for damage diagnosis of technical devices, buildings, etc.
-
This endoscope may
not be used for medical applications
!
-
Do not look directly into the LED, blinding
!
-
The area of the shaft can be exposed to temperatures of -20 – 80°C.
The housing part may be operated in a temperature range of -20 – 60°C.
-
The housing part is IP 54 the entire endoscope may therefore not be immersed in liquids.
The endoscope shaft conforms to IP 65, i.e. in liquids at low pressure (1 bar) may be
immersed.
-
The endoscope is oil and water resistant (The protection classes mentioned are to be
considered).
-
Do not expose the Econoscope to strong impacts or shocks.
- The shaft should not be bent!
-
Use only the supplied charger.
-
Any claims against the manufacturer and / or his authorized representative due to
damage from improper use of the device are excluded.
1.3. Scope of delivery
The scope of supply consists of the endoscope, the charger and the carrying case as
well as the manual.
1.4. Storage
Keep this device indoors only dry and dust free. Storage Temperature 0-60 ° C. Relative
humidity max. 60%.
1.5. Safety instructions
- Before each use, the endoscope must be checked for full functionality. If the function is
not guaranteed or damage is found, the device may not be used.
- In case of failure do not try to repair the device.
- Send the device back for repairs to us if necessary.
-
Changes
to the endoscope are prohibited for safety reasons. Changes result in the
immediate exclusion of liability.
