4-3 Function selection
Select the desired function ( RMS, Peak, Max HOLD )
by pressing the " Function Button " ( 3-7, Fig. 1 ).
continuously ( not release the button ), until the
Display will show the desiring function ( RMS, Max
HOLD, Peak ) , then release the " Function
Button " ( 3-7, Fig. 1 ).
Remarks :
1. RMS measurement is intend to measure and
root means square ( RMS ) value.
a. Available for Acceleration, Velocity only
When the select to the unit of Acceleration or Velocity,
b. The Display will show the indicator " RMS ".
c. Typically, for Acceleration and Velocity measurement
always select the RMS measurement.
2. Max HOLD measurement is intend to measure and
update the max. peak value.
a. Available for Acceleration, Velocity, Displacement
measurement.
b. The Display will show the indicator " Max HOLD ".
3. Peak measurement is intend to measure the
peak vibration value.
a. Available for Acceleration, Velocity measurement only.
b. The Display will show the indicator " Peak ".
4. After select the Function will be saved into the circuit with
default.
14
