5-2 Auto Datalogger ( Set sampling time 1 second )
≧
a. Start the datalogger
Press the " LOG Button ( 3-8, Fig. 1 ) > 3 seconds
continuously, the lower LCD will show the " LOGGER "
indicator and flashing per sampling time, at the same
time the measuring data along the time information will
be saved into the memory circuit.
Remark :
*
How to set the sampling time, refer to Chapter 7-2,
page 24.
*
How to set the beeper sound is enable, refer to
Chapter 7-4, page 24.
b. Pause the datalogger
During execute the Datalogger function, if press the
" LOG Button " ( 3-8, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the the " LOGGER " will be no flashing.
Remark :
If press the " LOG Button " ( 3-8, Fig. 1 ) once again
will execute the Datalogger again, the bottom text of
" LOOGER " will flashing.
c. Finish the Datalogger
During execute the Datalogger function, press the
" LOG Button ( 3-8, Fig. 1 ) > 3 seconds continuously
again will finish the Datalooger function, the " LOGGER "
indicator will be disappeared and finish the Datalogger.
function.
18
