yES - Intend to format the SD memory card
no - Not execute the SD memory card format
2)If select the upper to " yES ", press the " Enter Button
" ( 3-8, Fig. 1 ) once again, the Display will show text
" yES Enter " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
7-7 Set Metric/Imperial unit
When the lower display show " unit "
1)Use the " Button " ( 3-5, Fig. 1 ) or " Button "
▲
▼
( 3-7, Fig. 1 ) to select the LCD symbol " m/s^2 "
or " ft/s^2 ".
m/s^2 - Meter will measure under " Metric " unit
f/s^2 - Meter will measure under " Imperial " unit
2)After select the symbol tp " m/s^2 " or " ft/s^2 ",
press '" ENTER Button " ( 3-8, Fig. 1 ) will save the setting
function with default.
8. POWER SUPPLY from DC
ADAPTER
The meter also can supply the power supply from the
DC 9V Power Adapter ( optional ). Insert the plug of
Power Adapter into " DC 9V Power Adapter Input Socket
" ( 3-13, Fig. 1 ). The meter will permanent power ON
when use the DC ADAPTER power supply ( The power
Button function is disable ).
26
