Manual
12
6 - Wind direction calibration
Select option and press Enter
Enter date dd/mm/yy
Enter the date in the indicated format (dd = day, mm = month, yy = yea
r) and press „ENTER“.
Example
: 09/01/13
Note
: The date must be entered with a “/”. Otherwise, you must repeat the setting.
Attention
: As soon as the batteries are removed, date and time are reset. The setting must be repeated.
5.2.2.7 Time setup
When you are in
the main menu, press “4” and “ENTER” to set the time:
MENU - 5.4.1sd
------------
1 - AVG Time 60 seconds
2 - Anemometer setup
3 - Date today: 09-01-13
4 - Time now: 13:49:25
6 - Wind direction calibration
Select option and press Enter
Enter time in 24h, hh:mm:ss
Enter the time in the format indicated (hh = hour, mm = minute, ss = second) and press “ENTER”.
Example
: 13:49:25
Note
: The time must be entered with a “:”. Otherwise, you must repeat the setting.
Attention
: As soon as the batteries are removed, date and time are reset. The setting must be repeated.
5.2.2.8 How to import data by means of the terminal via PC
As soon as all settings have been made, you will be in the main menu. Insert the SD card into the SD
card slot and confirm with “ENTER”.
The memory of the wind logger will now update and all settings are transferred.
If the device is still connected to a PC, you should see the following:
Example:
Card size: 120818 KB
SD Header updated
After this, the saved data will be displayed in your terminal programme everytime data are saved.
16-06-08, 19:38:36, 90, 21.7, 0.7, 1.3, 0.1, 0.8, 1.6, 0.2
Explanation:
16-06-08
date
19:38:36
time of the saved set of data
90
wind direction in degrees
21.7
temperature in °C
0.7
average wind velocity in m/s, anemometer 1
1.3
maximum wind velocity, anemometer 1
0.1
standard deviation anemometer 1
0.8
average wind velocity in m/s, anemometer 2
1.6
maximum wind velocity, anemometer 2
0.2
standard deviation anemometer 2
You can now disconnect the wind logger from the PC and install it.
