GRATING SPECTROPHOTOMETER OPERATING MANUAL
30
3.3 Average
When the measured sample is very large or relatively not very uniform,
users need to measure several points to get an average reflectance to show
the sample true chromatic value. This instrument can achieve 2-99 times
average measurement.
In the main menu, click “Average” as shown in Figure 14, input average
times and click
to confirm.
If input 1 time, it measures as usual; if more than 1, it will generate
measurement results after average times under standard and sample
measurement.
Figure 14 Average Measurement
3.4 Light Source
Users could set corresponding light source according to the actual test
