© PCE Instruments
2
Attention:
•
When the meter is in operation, a slight clicking sound can be heard every few seconds.
This is normal and means that the IR sensor is sensing the surroundings.
•
Do not place the meter directly near a strong heat source.
•
When charging, make sure that the correct adaptor is used. The adaptor plug may differ
depending on your region. If the mains plug is incorrect, the instrument may overheat,
electric shock, fire, chemical leakage from the battery or explosion of the device may
occur.
•
After charging, disconnect the charging cable from the socket and the device.
•
If the meter comes into contact with a liquid, wipe it dry immediately. If the liquid
enters the interior of the meter, switch off the power supply immediately. Further use
may result in product damage.
•
Problems due to water condensation
If you use the instrument successively in areas with different ambient temperatures,
condensation may form on the lens and sensor cover or inside the instrument. To avoid
this, the instrument should be transported in its bag or a plastic bag. Allow it some time
to reach ambient temperature before use. If condensation has formed inside the
instrument, switch it off immediately. Otherwise, the meter may be damaged.
•
Long-term storage
The unit should be stored in a cool and dry place when not in use for a long period of
time. The battery should be charged for two hours at least every three months to ensure
that the meter is ready for use and that the battery life is not reduced.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.
