11
Selecting the TSS measurement mode
6.1
Press and hold the
key for 3 seconds to enter the setup menu.
6.2
Press the
◄
or
►
key to select the
“
Measurement Mode
”,
press the
Enter
key to confirm.
6.3
Press the
◄
or
►
key to select
“
mg/L (TSS)
”,
press the
Enter
key. The meter enters the Total Suspended Solids measurement mode.
TSS measurement
The measurement method is the same
as the turbidity. Please refer to page 10 “Turbidity Measurement”.
Storing and Recalling Data
The PCE-TUM 50 turbidity meter is capable of storing and recalling up to 200 data sets.
Storing readings into memory
During the measurement process, press the
MI
key to store the reading
into the memory. The display will show “Data is stored in memory”.
Viewing stored readings
1.
Press the
MR
key in the measurement mode, the meter shows the stored data.
2.
If necessary, press the
◄
or
►
key to view the data log.
3.
Press the
ESC
key, the meter returns to the measurement mode.
