© PCE Instruments
6
6.4
Backlight
6.4.1
Battery operation
Press the
"▼ / Power" key to switch on the display backlight for approx. 6 seconds when the
mezter is switched on.
6.4.2
Mains operation
Press the
"▼ / Power" key to switch the display backlight on or off when the meter is switched
on.
6.5
Switchin the meter off and on
•
If necessary, disconnect the plug-in mains adaptor from the mains and the meter.
•
Press and hold the
"▼ / Power" key for 2 seconds.
•
To switch the meter back
on again, briefly press the "▼ / Power" key once.
It is not possible to switch off the meter while power supply is provided by mains adaptor.
6.6
Data transfer to the PC
•
Remove the SD card from the meter when the log function is finished.
Attention!
Removing the SD card while the log function is running can lead to data loss.
•
Insert the SD card into the corresponding SD card slot on the PC or into an SD card
reader connected to the PC.
•
Start the spreadsheet programme on your PC, open the file on the SD card and read
out the data.
