© PCE Instruments
5
4.2
Image recording
•
In image mode, a camera icon will displayed on the upper left edge of the LCD.
•
Set the desired magnification and focus by turning the
focusing wheel
.
•
Set the desired brightness by using the
brightness slider
.
•
Press the
OK key
shortly to take a picture. The image will be saved automatically.
4.3
Viewing saved recordings
To view the saved images and videos, you must be in data mode. You know that you are in data
mode when the file name is displayed on the upper edge of the LCD. To switch between the
recordings, use the
arrow keys
. To stop the playback, press the
OK key
again.
5
Settings
Settings can be made in any mode. To do so, shortly press the
Menu key
. Repeat this to open
the general settings. Further information on the settings can be found in chapter 5.3.
•
Navigate through the settings menu by using the arrow keys.
•
Enter the setting options by pressing the
OK key
and confirm the desired setting with
the
OK key
.
5.1
Video settings
5.1.1
Resolution
As resolution, you can select 720p or VGA.
5.1.2
Time label
Under time label, you can enable or disable that the time is shown in the video.
5.1.3
Exposure compensation
Set the desired exposure value.
5.2
Image settings
In the image settings, you can set the image quality. You can select VGA, 1,3M, 2M or 3M.
5.3
General settings
Press the
Menu key
twice to enter the general settings of the device.
5.3.1
Format
Under format, you can format the micro SD card.
