© PCE Instruments
7
4.10
Set markers
Once the meter is in recording mode, you can switch to marker view by pressing the
key. To
set a marker, press the
key for three seconds to save a marker in the current recording. A
maximum of three markers can be set.
4.11
Read out data
To read out data from the data logger, connect the measuring instrument to the PC and start the
software. When the instrument is connected to the computer, the USB icon appears on the
display.
5
Hints
5.1
External sensor
If the external sensor was not recognized, it may have been deactivated in the software. First
activate the external sensor in the software.
5.2
Battery
When the battery icon flashes or the display shows OFF, this indicates that the batteries are low
and need to be replaced.
6
Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms
7
Disposal
For the disposal of batteries in the EU, the 2006/66/EC
directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
