info@tursdaletechnicalservices.co.uk
3
SAFETY INFORMATION
z
Read the following safety information carefully before attempting to operate or service the meter.
z
To avoid damages to the instrument do not apply the signals which exceed the maximum limits shown in
the technical specifications tables.
z
Do not use the meter or test leads if they look damaged. Use extreme caution when working around bare
conductors or bus bars.
z
Accidental contact with the conductor could result in electric shock.
z
Use the meter only as specified in this manual; otherwise, the protection provided by the meter may be
impaired.
z
Read the operating instructions before use and follow all safety Information.
z
Caution when working with voltages above 60V DC or 30V AC RMS. Such voltages pose a shock
hazard.
z
Before taking resistance measurements or testing acoustic continuity, disconnect circuit from main
power supply and all loads from the circuit.
Safety symbols:
Caution refer to this manual before using the meter.
Dangerous voltages.
Meter is protected throughout by double insulation or reinforced insulation.
When servicing, use only specified replacement parts.
CE
Comply with EN-61010-1
All manuals and user guides at all-guides.com
