© PCE Instruments
24
Eng
li
s
h
5.3
Settings
5.3.1
Date and time settings
To change the date and time settings, follow these steps:
1.
While holding down the "SETUP" button, turn the unit on. Release the "SETUP"
button when the "TIME" icon appears on the display. Now you get to the date and
time settings. The display shows the date.
2.
Press the "SETUP" button to enter the minute settings. The display now shows "nn"
and above that the set value. You can change the value by pressing the "LEVEL"
button.
Then press the “SETUP” button to go to the hour settings.
3.
The disp
lay now shows “h
-
A” or “h
-
P” with the set value above. To change the value,
press the “LEVEL” button. “h
-
A” stands for AM while “h
-
P” stands for PM.
After that,
press the “SETUP” button to go to the date setting.
4.
Now you are in the day settings. The displa
y shows “DATE –
d
–” and the set day
afterwards. To change the value, press the “LEVEL” button. Then press the “SETUP”
button to go to the month settings.
5.
In the month settings, the display shows “DATE –
H
–
” and the set month. To change
the value, press
the “LEVEL” button. Then press the “SETUP” button to go to the year
settings.
6.
In the year settings, the display shows “DATE –
Y
–
” and after that the last two digits
of the year.
To change the value, press the “LEVEL” button.
Note: You can confirm and exit the settings at any time by pressing and holding the
“HOLD” button.
To restore the date and time default settings, follow these steps:
1.
While holding down the "SETUP" button, turn the unit on. Release the "SETUP"
button when the "TIME" icon appears on the display. Now you get to the date and
time settings. The display shows the date.
2.
Press the “SETUP” button until the display shows “rSt”.
3.
Press and hold the “HOLD” button to restore default settings.
5.4
Software
5.4.1
Install the USB drivers
To install the USB drivers, follow these steps:
1.
Put the supplied CD in the CD-ROM drive of your PC.
2.
Access your CD-
ROM drive and open the “USB Driver” folder. There are two different
folders in it: “
Windows_2K_XP_S2K3_Vista
” and “
Windows_7
”.
3.
Open the folder which matches your Windows version and run the
“
CP210xVCPInstaller.exe
” file.
If you do not know which Windows you are using go to the desktop, right-
click on “My
Computer” and select “Properties”. A new window appears wh
ere you can see your
Windows version.
4.
Click on “Install” in the software installer to start the installation.