Manual
18
1.Use the arrow buttons to set the desired value.
2.Push the Enter button to confirm your selection.
To leave further settings
When the display shows
“ESC”
:
Push the Enter button to leave further settings and to return to the normal measurement function.
Note:
You can leave further settings by pushing the ESC button (3).
5.19 RS232 interface
The device is equipped with an RS232 interface via a 3.5 mm socket. The output is a 16-digit stream
which can be set in line with the user-specific requirements. An RS232 cable with the following features is
necessary to connect the device to a computer: