Manual
8
5.7.4
Palette
Here the user can set the palette shown on the display during the measurement. Different palettes are
available for different purposes. You can navigate through the palettes by means of the arrow buttons.
5.7.5
Temperature setting
Here you can select the temperature unit, either °C or °F.
5.7.6
System setting
Via the system settings you can change or set various functions, for instance you can set automatic
switch-off or functions like date, time, language or brightness. You can also reset the device to factory
defaults. Furthermore, you can find a help function which makes it easier for the user to handle the
device.
5.8
Focussing
To get a high-resolution image, you can find a focusing wheel at the front side of the camera which is
used to adjust the resolution of the images in line with different distances.
5.9
Colour scale
The colour scale is on the right-hand side of the display and runs vertically. The colours of the scale
change in line with the palette used for the measurement. It gives an approximate outline of the
temperatures measured outside the hair cross. In relation to the ambient temperatures, the colour scale
can be very detailed. T
here are two different modes for this purpose: the “auto” mode and the “lock” mode
(factory default setting). If “lock” mode is on, the scale has fixed extremes. In “auto” mode, the limits are
variable and adapt to their environment.
5.10 To display images
To display the images, you must push the play button below the select left button so that the saved
images are shown on the display. You can then have a look at them again or delete them. If you push the
play button and the display shows the text “”! No SD card”, the SD card has been removed and must be
inserted again. In this case, the display will also show a symbol on the left side of the time indication
which looks like a stylised SD card along with an exclamation mark.
5.11 Switch-off
There are several possibilities to switch the device off. Firstly, it is possible to switch the device off for
only a short time to save battery power. To do so, you must only push and release the power button. To
unfreeze the display, you must push the power button again or pull the trigger.
To switch the device off completely and permanently, you must push and hold the power button. The
switch-
off process is then indicated on the display. Hold the button until the indication “POWER OFF” is
complete and the device switches off as otherwise the process would be interrupted and the device would
remain switched on.
After switching the device off, the cover should be closed again to ensure protection of the lens.
