L
L
6. How to wear it firmly
7.
Make a call.
To make a call, dial through your mobile phone.
8.
Reject a call.
Touch 2 Sec
If you can't wear it firmly, use the ear hook as assist
-----
-----
-----
-----
microphone toward jaw
-----
-----
Left-ear use
Right-ear use
11.
Voice dialing
12. Redial last number
13. Volume control.
1.When you have a incoming call
just “touch” the Talk key ,after you
hear the ring from the headset.
2.You can also click
MFB
key to receiving a call
When you finish a call; touch the
Talk key 1 Sec. ----end the call.
10. End a call.
Click
Double-Click
Touch 1 Sec
-----
-----
You can adjust the headset volume
during a call.
9.
Answer a call.
Mute & un-mute
Touch
-----
-----
-----
-----
-----
-----
1.When during call press the “ Volume up & Down" key
; you will hear a “ Do-lu-do-do" sound,
then your voice won't be heard.
2.Click the Volume up or Volume Down key again, you will
hear the " Beep " sound to un-mute the microphone.
simultaneously
1.The headset should be under
"Connected mode". By double-click
the
MFB
key, after you hear a " Do-
Do " sound from the headset, then it
will redial again.
2.This function depends on the
specification of your mobile phone.
1.The headset should be under
"Connected mode", click the
MFB
key; then you can make the " Voice
dialing " by the mobile phone's
operation instruction..
2.This function depends on the
specification of your mobile phone.
When you hear the in-coming
call rings from your headset;
touch the Talk key touch panel
(logo area)for 2 Sec, when you
hear the " Do Do" sound than
release it. ---Reject a call.
Inserted
completely
Cap the ear tip
X
Parallel
The salient insert
in the little hole
X
Inserted
Incompletely
Inserted
Incompletely
Inserted
Incompletely
The ear tip must insert to ear bone completely.
Ringing.....
Ringing.....
3.
Turn on/ Turn off
4.
Pairing with your mobile phone
It need to pair with your Bluetooth device, first time.
5. How to wear the headset
4. "
BT-06HS-T
” will show on certain items in your mobile phone.
5. Key in pairing pin code "
0000
”press "
yes
" , the indicator
light will turn from the blue/red flashing status into blue
flashing, it means the pairing has been successful.
7.Now the headset has been in the
"connected mode"
.
you may receive or dial the
phone call.
5 Sec
- Stand-by
mode-------
blue light
flash once every 5 Sec.
-
C
blue light flash two times every 5 Sec.
-
Active call
mode-----
blue light flash three times every 5 Sec.
- low battery-----
red light flash.
onnected mode----
Choose the ear tip size
Choose the ear plug size
Power on - blue light flashing.
Power off - red light flashing then off.
Red blue
1.Before pairing, make sure your
headset is off.
2.Press the MFB key for at least
5 sec; the blue and red light
flashing alternately it means the
headset is in the “
pairing mode
".
3.Please ensure that your mobile
phone is provided the Bluetooth
Function, and activate the function.
3 Sec
Press the MFB key for about
3 Sec, to turn on and turn off.
10cm~1m
The pairing
distance
Devices found
BT-06HS-T
large one on headset already
Over 7
.
Over 7 Day
Within 90 ~120Mins.
10 meters(open space)
Handsfree / Headset .
Bluetooth V2.1
hrs
s.
0 ~ 55 'C
0% ~ 90% (non-concrete status)
5V DC, 00~240V AC adapter
Specification of the Headset
1.
Charging the Headset
1. At least for 4 hours when first time charging,
2. When charging, the red light on; fully charged the light
will be off.
2. Introduction of the product
Bluetooth Headset
User Manual
BT-06HS-T
Bluetooth Standard
Talktime
Standby time
Charging time
Supported Bluetooth profiles
Operating temperature range
Storage temperature
Operation range
Power Supply
USB
Port
Charging Plug
light indicator
(logo area)
Volume up
MFB
/Volume down
Speaker
Ear tip
Ear plug
Hook point
Charging Port
Microphone
Talk key
touch panel
Model: BT-06HS-T
FCC ID. :
SJ9-BT-06HS-T
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATIONS IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
( 1 ) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE
( 2 ) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFEERENCE THAT MAY UNDESIRED OPERATION.
Made in Taiwan
Brand Name:PCI
User guide
