MicroTrans
II
Summing Operation & Maintenance Manual
Paragon Controls Incorporated
15
Revision Level 002
5.4.3. Temperature
Values
The Temperature Values Menu allows the factory or user to set the minimum and maximum temperature
range values that represent the input signal from the external temperature transmitter or the building
automation system.
Field
Setup
Menu
Operating Range
Temp. Units
Temp. Range
Zero Calibration
Temp. Values
Eng. Units
Temp Input
Min Value
Lockdown
Fixed
Value
(-030)
Flow
Correction
AutoZero
Max Value
Temp. Comp.
(130)
Meas. Fl. Disp. Fltr
If the new temperature values cause the existing Operating Range Value to be outside the new calculated
Minimum or Maximum Full Scale Value, the below Warning Message will appear and the Operating
Range will be reset to the new Maximum Full Scale Value by pressing Enter. The display will
automatically jump to the Op Range Menu allowing the user to enter a new Operating Range Value.
This can be accomplished by performing the steps under Section 5.2. See Temperature Range Example
below.
Warning Message:
Op Range Outside
Allowable Value
Op Range will be
Reset to the MAX
F.S. Value
(Press Enter)
