MicroTrans
II
Summing Operation & Maintenance Manual
Paragon Controls Incorporated
44
Revision Level 002
Altitude
(0000)Ft
Op Range Outside
Allowable Value.
Reset to Max F.S.
(Press Enter)
Op Range value within
New Min/Max values
Op Range value exceeds
New Min/Max values
Entering a new Altitude
and pressing the Enter
button will calculate
new Min & Max Op
Range values.
Warning Message
Operating Range
(ACFM)
(6,000 - 12,000)
(12,000)
Pressing the Enter button
will reset the current Op
Range value to the new
calculated Max. F.S value
which will represent 100%
of the process output value.
The Op Range value can be
changed and will represent
100% of the process output
signal (5vdc, 10vdc or 20mA).
-Altitude Example-
Altitude
Accepted
(0100)Ft
9.8. PROCESS
OUTPUT
MENU
9.8.1. Output
Selection
The Output Selection Menu allows the user to select either the MT2 Measured signal or the Total
summed signal to be available at the Process Output (see section 3.1, J2 pins 4 & 5).
Tech Config
Password: 1000
Controller Parameters
Output Selection
Output Selection
Area Factor
Volt Out 5/10vdc
Transducer Cal.
Min Calibration
(MT2 Measured / Total)
Ext. Flow Source
Span Calibration
Ext. Flow Span
Return to Menu
(Total)
Altitude
Process Output Menu
Temp. Output Menu
