MicroTrans
II
Summing Operation & Maintenance Manual
Paragon Controls Incorporated
54
Revision Level 002
10. WARNING MESSAGES
10.1. INPUT PRESSURE OVERRANGE MESSAGE
If the input pressure exceeds the entered Operating Range Value, the following message will appear on
the display. It will alternate between the process display and the error message until the input falls
below the Operating Range Value.
- Caution -
Input Beyond
Operating Range
Selected
10.2. TRANSDUCER
CALIBRATION
MESSAGE
If during a transducer zero or span calibration process, the transducer output pressure value measured
exceeds ±20% of the expected value, the following message will appear on the display. Once the Enter
button is pressed, the display returns to the previous calibration menu.
Value entered is
Outside Factory
set limits
(Press Enter)
10.3. OPERATING
RANGE
MESSAGE
If the new values entered for Temperature Compensation, Area Factor, or Altitude (see Sections 8.7, 9.2,
and 9.5) causes the Operating Range Value to exceed the new calculated Maximum Full Scale Value,
the following message will appear on the display.
Op Range Outside
Allowable Value.
Op Range will be
Reset to the MAX
F.S. value
(Press Enter)
