75
3
Chapter3 Advanced Setup & Configuration
The rm= entry should correspond to the IP address you have assigned to
the MFP Server. You can also use a host name if you have assigned one in
the /etc/hosts file.
The sd= entry should correspond to the spool directory you created in the
previous step.
The rp= entry should correspond to the port name of the remote printer.
The values should be one of lpt1, lpt2 or lpt3 depends on the printer port.
The MFP Server should now be available for printing from your Unix/
Linux host.
2. How to Install MFP Server
on MAC OS
LPR Printing (Line Printer Remote technology) allows Macintosh
computers to connect to MFPs or printers via TCP/IP. LPR Printing can be
set up on any Macintosh with version 9.x above.
MAC 10.4.x
To enable LPR Printing in Macintosh 10.4.x, please follow the procedures
below.
1.Open Print and Fax from the System Preferences.
2.With the Printing tab selected, click the
ņ
Add
Ň
button.
3.When the Printer Browser opens, select
ņ
IP Printer
Ň
.
4.In the
ņ
IP Printer
Ň
screen, please configure as below:
Protocol: Select Line Printer Daemon - LPD as the Protocol.
IP Address: Set the address to the MFP Server's IP Address, for example:
192.168.1.200.
Summary of Contents for Mini-101M
