PCL Air Compressors
CM2024D/CM2550D/CM3100DT
www.pclairtechnology.com
www.pclairtechnology.com
76456 Issue 2
Personal safety
•
Always use ear and eye protection when working with the machine or perform
maintenance.
•
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from the power tool. Loose clothes, jewellery or long hair can
become entangled in the moving parts.
Service
Your power tool should be serviced by a qualified specialist using only OEM spare
parts. This will ensure that it meets PCL’s required safety standards.
Specific safety instrutions for air compressors
WARNING! Make sure that both air consumption and maximum effective
pressure of pneumatic tools are compatible with the pressure set by the
pressure switch and the volume of air supplied by the compressor.
•
During operation the compressor and pipes reach high temperatures. Contact causes burns.
•
Keep a minimum distance of 4 meters between the compressor and working area.
•
The compressor gases must not contain substances that could lead to fire or explosion on
the compressor.
•
During operation, to ensure correct lubrication, the compressor must be placed on a table
horizontal surface.
•
To ensure optimal cooling, the compressor will be placed at a minimum distance of 50 cm
from the wall.
•
When uncoupling, the hose will be held by hand to avoid injury from hose whip.
•
Always wear safety goggles to protect your eyes from flying objects.
•
Do not weld the tank. In case of faults or corrosion, please replace immediately.
•
Avoid using air pipes and power extension cables with excessive length.
•
To extend operating life, the compressor must be used in a suitable environment (well
ventilated, and never in places affected by dust, acid, vapors, explosive or flammable gas at
an ambient tempe 5°C ... + 40°C.
•
The machine is double insulated. This means it has two completely independent types of
insulation that prevents the operator to enter into direct contact with the metal parts. This
measure represents the highest degree of protection against electrocution.
Application
This compressor is intended for personal use for the production of compressed air. DO NOT RUN
THE COMPRESSOR WITH ANY OTHER TYPES OF GAS.
Operations: swelling, operations that require connection of pneumatic tools, painting, washing
with aqueous detergent, by following the specific rules.
IT IS NOT DESIGNED FOR CONSTANT PROFESSIONAL USE.
Decription
1. Air filter
9. Transport handle
2. Pressure tank
10. Safety valve
3.
Wheel
11.
Drain
valve
4. Support foot
12. Pressure gauge for tank
5. Quick coupling for adjusted pressure
13. Oil discharge screw with eyehole level
6. Pressure gauge for adjusted pressure
14. Oil filling cap
7. Pressure regulator
15. Quick coupling for pressure tank takeover
8. On/Off switch
