NEXUS
Generator & Multi-head Inflator user manual
www.pclairtechnology.com
For inspection and checking of
the actual tyre pressure:
1.
Simultaneously d and - keys together (long
sound tone will be heard), then press the start button 5
times
2.
Tyre pressure will now display pressure resolution to 0.01
bar. User may then compare pressure accuracy to test
apparatus (Note: Unit will not function as tyre inflator)
3.
By pressing any button, the unit will resume to normal
screen operation.
Calibration & Accuracy
The accuracy of our digital units when released from our factory
is that:-
The maximum permissible error (MPE) =
0.08 bar.
Service / Maintenance
There is no requirement to service the following items:
1.
Pressure Transducer
2.
Electric Control Board
If these are faulty they can only be
replaced by a competent person.
Please refer to an Authorised
dealer.
Periodically
Check the hose.
Check the tyre connector.
Remove air input supply and tyre hose from the head.
Unscrew captive sintered filters from filter housings and
clean or replace.
Working safety instructions
Since the unit is not explosion-proof, the device should not be
installed in areas where explosions are possible. Consideration
must be given to the requirements relative to Hazardous Area
Standards for your region or country.
The unit
is designed and built to the relevant basic health and
safety requirements of the EC.
This product can be dangerous if used
improperly. Children should not be
allowed to use this equipment, as
incorrect setting can allow tyre to be
over inflated and a subsequent tyre
burst/explosion can occur!
Each person who is involved with installation, start-up,
maintenance and the operation of the unit must read and
understand the complete operating manual.
The PCL tyre inflators are exclusively approved for the
dispensing of air/N
2
. Each use which doesn't follow this
purpose as well as modifications to the product will be
deemed to be improper use. The manufacturer is not liable
for damages caused by improper use, the risk lies solely
with the user.
Proper use of the product also implies the
observance of the manufacturers
instructions with regard to installation,
start-up, operation and maintenance.
All works concerning installation, start-up,
adjustment and maintenance must be
made by qualified staff. For the operation
of this tyre pressure inflator the local
safety and accident prevention rules must
be observed in all cases.
High Pressure air is stored within the
system.
Do not exceed the maximum air input
pressure.
Do not operate this product if tired or
under the influence of medication, drugs
or alcohol.
To avoid the risk of personal injury,
especially to the eyes, face or skin DO
NOT direct the air/N
2
stream at any
person.
