SeeGull
®
EX
flex
®
Reference Manual
PCTEL, Inc., RF Solutions
Page 7
Revision F
2. Overview and System
Requirements
This section describes the SeeGull EXflex
Scanning Receiver, including the applicable
system configuration and software
requirements.
2.1. General Description
The SeeGull EX
flex
is a tool for signal
strength and modulation measurement,
engineered for the rigors of mobile network
testing during planning, installation and
maintenance of wireless networks. The
SeeGull EX
flex
The USB communication link allows the
host to control the operation of the scanner
and to receive measurement results. (Refer
to
Section 4
Figure 1 - SeeGull EXflex Scanning Receiver
2.2. Initial Inspection
Upon receipt of the scanning receiver,
inspect the shipping container and verify
that the contents are complete and match
the packing list. The EX
flex
receiver should
look similar to the picture in
. If the
contents are incomplete or the SeeGull
EX
flex
Scanning Receiver appears
damaged, please call the Technical Support
line at (240) 460-8833
.
Figure 2 - Front View of SeeGull EXflex Scanning
Receiver Showing Connections
GPS Antenna Port
Power
Input
USB Interface
GPS Status LED
System Status LED
RF
Antenna
Port
