Better Solutions Are Within Reach
®
MODEL NUMBER:
PD181-682
Document Number:
PD196-164R2
Thin Wall Mount for PDI-DVD-SH
Page 1 of 2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
SAFETY STEPS:
1) Always wear safety glasses/goggles to prevent injury from debris.
2) Follow the installation/removal instructions for your existing products.
TOOL LIST:
1) P1 or P2, phillips screw driver
2) 1/4 " hex bit driver
3) PD219-128 (supplied with kit) TORX T20 hex bit
4) Safety glasses/goggles
PARTS LIST:
1) PD181-682 wall mounting plate for PDI-DVD-SH
2) PDITPHMSM4X76 : TORX pan head machine screw M4-.7 x 6mm.
3) PD219-128 : TORX T20 hex bit
PROCEDURE:
STEP 1:
Remove the top cover by pressing down above the ribbed
arrow located on the top front edge to release the snap tab.
Save to reinstall later.
STEP 2:
Mount the PD181-682 bracket to the wall using four
#8 sized fasteners and appropriate wall anchors.
These fasteners/anchors are not supplied with the
mount.
