PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
A Leader in Patient Communication
Solutions
™
MODEL NUMBER:
PD251-045 Bottom Mount DVD Kit For
32” Metal LED TV
Document Number:
PD196-337R2
Installation Instructions
Page 1 of 3
SCOPE:
To install a bottom mount DVD bracket to a 32” wall mounted metal LED TV using a PDI wall mount kit (not
included).
TOOL LIST:
1. Safety glasses/goggles
2. P1 or P2 Phillips screwdriver
SAFETY STEPS:
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
SUPPLIED PARTS:
ITEM
QTY
PART NUMBER
DESCRIPTION
1
4
PDIPPHMSM6X110
M6-1X10MM SCREW S
2
1
PD181-816
DVD MODULE BRACKET
3
1
PDISEMSM3X55
M3-.5X5MM SCREW S
4
1
PD106-776R
15 TO 26 PIN 36” RIGHT ANGLE
PROCEDURE:
STEP 1:
Attach the wall mounting plate (from separately purchased
kit) to the TV and secure with two PDIPPHMSM6X110 (1)
screws on the right side.
STEP 2:
This bracket is a new design. The DVD player must be securely attached to the bracket before
attaching the bracket to the TV assembly. The DVD player will fall if screw is not secured.
Slide DVD player (purchased separately) through tabs
on DVD mounting bracket PD181-816 (2) as shown.
Secure with PDISEMSM3X55 screw (3).
For PD168-051 Wall Bracket Kit
1
3
2
DVD
