Communication
System Inc.
Better Solutions Are Within Reach
TM
MODEL NUMBER:
PDI-P19LCDC
Document Number:
PD196-126R2
Quick Start Guide
Page 8 of 15
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 FX +1-937-743-5664
Product Accessories
(Not Included with TV)
75mm VESA Wall Mount
PD168-005
Patient Remote Control
PD108-421
(*For TV’s without DVD module
)
Programming Remote Control
PD108-420
¼” to 6-Pin Jumper Cable
PD106-416
Patient Remote Control
PD108-427
(*Remote comes with DVD module
)
¼” to ¼” Jumper Cable
PD106-417
Programming
The remote control (PD108-420) is used to perform all setup operations for the TV.
NOTE:
The following instructions assume you have correctly mounted the TV, wired an external pillow speaker, connected an RF
coax cable signal, and powered the TV on
.
Channels
The TV offers three different programmable Service Levels (Free, Basic, and Premium). Only one Service Level is available at a
time.
Setup Mode
Channel Setup
■ Service Level
Free
■ Signal
Cable STD
■ Picture
►
■ Auto Program
►
■ Sound
►
■ Add/Delete Channels
►
■ Channel Setup
►
■ Clear Service Level
►
■ Features
►
■ Copy Service Level
►
■ OSD Language
English
■ Parental Control
►
■ Sources
►
■ Power On Channel
►
■ FM RADIO Setup
►
■ Channel Lock
Disabled
■ Channel Memory
Override
Enabled
■ Cloning
►
Position: ▲▼
Position: ▲▼
Exit: SETUP
Next: ◄►
Exit: SETUP
Next: ◄►
1.
Press the SETUP button on the remote control.
2.
Press ▲ or ▼ to highlight Channels.
3.
Press ► to enter the Channels sub-menu.
Signal
Four different tuning types are available depending upon the healthcare facility’s signal type. Selection of the correct signal type is
required for the TV to recognize all possible channels and before any channel programming can begin.
1.
From the Channels menu, p
ress ▲ or ▼ to highlight Signal.
2.
Press ◄ or ► to select Air, Cable STD, Cable IRC, or Cable HRC.
NOTE:
Most hospitals use the Cable STD signal style.
3.
Go to Auto Program on the next page.
