Communication
System Inc.
Better Solutions Are Within Reach
TM
MODEL NUMBER:
PDI-P19LCDC
Document Number:
PD196-126R2
Quick Start Guide
Page 9 of 15
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 FX +1-937-743-5664
Auto Program
The TV automatically scans each available channel for activity. Channels that display activity are memorized into the selected
Service Level.
Channel Setup
Auto Program
■ Signal
Cable
STD
■ Mode
Analog Only
■ Auto Program
►
■ Channel Sequence
Interleave A+D
■ Add/Delete Channels
►
■ Additional Digital
Signal
None
■ Clear Service Level
►
■ Free
Blank ►
■ Copy Service Level
►
■ Basic
Blank ►
■ Parental Control
►
■ Premium
Blank ►
■ Power On Channel
►
■ Channel Lock
Disabled
■ Channel Memory Override
Enabled
Position: ▲▼
Position: ▲▼
Exit: SETUP
Next: ◄►
Exit: SETUP
Next: ◄►
1.
After setting Signal, press ▲ or ▼ to highlight Auto Program.
2.
Press ► to select it.
3.
On Mode, p
ress ◄ or ► to select the scope of channel scanning.
Analog Only: TV searches for analog channels only.
Digital Only: TV searches for digital channels only.
Analog and Digital: TV searches for both analog and digital channels.
4.
Press ▲ or ▼ to highlight Channel Sequence.
5.
Press ◄ or ► to select the Channel Sequence in which the channels are displayed.
Interleave A+D: Channels are displayed in the order of channel number.
All A then D: All digital channels are displayed after all analog channels.
6.
Press ▲ or ▼ to highlight the Service Level (Free, Basic, or Premium) you wish to program. The menu displays the
current programming status of each level as either Programmed or Blank.
NOTE:
A programmed Service Level can also be reprogrammed if desired.
7.
Press ► to start auto programming.
8.
A confirmation menu will appear before proceeding. Press ▲ to start auto programming. Press ▼ to cancel the
operation. The TV now will search all available channels. Auto programming requires several minutes to complete.
NOTE:
Digital channel auto programming may take longer than 10 minutes to complete.
9.
Press the SETUP button to return to normal TV viewing.
Cloning and Firmware
Cloning allows quick programming of a TV from a USB Flash Drive. The operation involves first downloading
setup information from a programmed host TV to a USB Flash Drive and then uploading the setup information to
another TV. Cloning can also be used to re-program a programmed TV.
You can also upload to the latest version of firmware.
Firmware and Cloning instructions can be found on the PDi Communication web site:
http://www.pdiarm.com/support/
Click on the Firmware and Driver link and follow the on-screen instructions to find your TV model.
