Better Solutions Are Within Reach
®
MODEL NUMBER:
SW24LEDA, SW32LEDA, SW42LEDA
DVB-T LED TV’S
Document Number:
PD196-210R1
User Manual
Page 9 of 22
PDi International, PTE LTD, Henry Building, 5 Eunos Ave #2-00 8A, Singapore 409459 PH +65-6846-1482 FX 937-743-5664
Channel Menu
To enter TV menus, you must press “OK” then 9090
.
Note:
The following instructions assume you have a programming remote, have
correctly mounted the TV and connected an RF coax cable signal.
Service Levels Setup
This TV contains a Disable and three separate Service Levels; Free, Basic, and
Premium. Only one Service Level is usable at a time.
Disabled
– This is like a mechanical key lock – when in
Disabled
Service Level,
the TV can be turned off and on, but it cannot be used for viewing. A standard
message appears on a black screen.
Free
– This lets patients watch hospital education and information channels
without renting the TV. The channels containing programming for no charge are
typically programmed into this level of service. This is the factory default setting for Service Level.
Basic
– This service level typically allows additional channels beyond those
offered in the FREE level.
Premium
– This is the highest service level with typically the most channels
available for viewing.
1. In “Channel” screen,
press ▼ to highlight “Service Level”.
2.
Press ► to take you to next screen and select desired service level.
Once desired service level is shown it automatically saves and you may
exit the screen.
Channel Tuning
Auto Tuning
The TV automatically scans each available channel for activity. Channels that
display activity are memorized into the selected service level.
1.
In the “Channel” screen, press ▼ to highlight “Service Level. Press “OK”.
2.
Press ▼to highlight “Auto Tuning”. Press “OK”.
3.
Press ► to select ATV, DTV, or ATV+DVT
4.
Press ▼ and ► to select origin.
5. Press “OK” for auto programming. This step could take several minutes.
6. Press Exit to leave screen.
