RE
D
BLA
CK
WARNING:
TEST
RESET
RESET
TEST
TEST
RE
D
BLA
CK
WARNING:
TEST
RESET
TEST
IF YOUR PDL POWERGUARD TRIPS DURING USE
1 The indicator on your PDL Powerguard will change to black.
2 Remove the appliance or tool from your PDL Powerguard.
3. Press the RESET button.
4. The indicator of your PDL Powerguard should be showing RED. Repeat
how to use instructions.
5 Your appliance or tool and its cord should be checked by a suitably qualified
person.
NOTE: If power supply is switched off, your PDL Powerguard will trip out -
indicator BLACK
TECHNICAL SPECIFICATIONS
Rated Voltage
230 - 240V a.c.
50Hz
Rated Current
10 amp
Maximum Load
2400 watts
Tripping Current
30 mA
Average Trip Time
30 ms
Cord Length
2 metres
Weather Protection
IP56
Type Tested to
AS3190
AS3100
Type FS to AS/NZ3190 - automatically opens on failure
of the supply voltage and has d.c. pulse sensitivity.
RE
D
BLA
CK
WARNING:
TEST
RESET
RESET
TEST
XX A
XXX V
Single
CAT
RE
D
BL
A
CK
W
AR
NIN
G:
TE
ST
R
ES
ET
R
ES
ET
TE
ST
TE
ST
RE
D
BLA
CK
WARNING:
TEST
RESET
TEST
XX A
XXX V
Single
CAT
RE
D
BL
A
CK
W
AR
NIN
G:
TE
ST
R
ES
ET
R
ES
ET
TE
ST
TE
ST
XX A
XXX V
Single
CAT
RE
D
BL
A
CK
W
AR
NIN
G:
TE
ST
R
ES
ET
R
ES
ET
TE
ST
TE
ST
HOW TO USE YOUR PDL POWERGUARD
1
Plug your PDL powerguard into a fixed socket
outlet and switch socket ON.
Although Model 956 can be used with
conventional wall sockets and tools or
appliances with standard plug tops, it will
only retain its weather and dust protection
features if used with weather protected
socket outlets and plug tops.
2
Press RESET button to activate your PDL
Powerguard. The indicator will change from
BLACK to RED.
3
Switch OFF socket outlet, then check that the
indicator has changed to BLACK. If this does
not occur, remove your PDL Powerguard and
contact a qualified service agent for advice,
before use.
4
Switch ON socket outlet again and press
RESET button to activate your PDL
Powerguard. The indicator will change from
BLACK to RED.
5
Press TEST button, then check that the
indicator has changed to BLACK. If this does
not occur, remove PDL Powerguard and
contact a qualified service agent for advice,
before use.
6
Press RESET button again to activate your
PDL Powerguard. The indicator will change
from BLACK to RED.
7
Plug required appliance or tool into your PDL
Powerguard and operate as normal.
Although Model 956 can be used
with conventional wall sockets
and tools or appliances with
standard plug tops, it will only retain its weather and dust protection
features if used with weather protected socket outlets and plug tops.
