1. Install Motor
Install the motor on the 15mm rod and make sure the motor
gear matches with the lens gear.( If it install on DSLR Camera
lens, please use the camera hot shoe clamp.)
CALIBRATION/
RESET Button
Lights For
Motor Status
Lights For
Controller Status
Battery
0.8 Gear
Antenna
Step 1.
Install the
motor on
15mm rod.
Step 2.
Locking U-clamp.
Step 3.
Install battery.
Note:
If using a DSLR camera
lens,the lens will need a 0.8
lens zip gear in order to fit with
the motor gear.
*
Micro USB
charge
ON/OFF
Button
1/4Screw
Battery
compartment
*After the controller
shell is unplugged
