background image

2. Turn on the Bluetooth controller and motor

    

Press the ON/OFF button on the Bluetooth controller for three seconds 

until the indicator light powers on. The motor will turn on automatically 
when the battery is inserted.

3. Bluetooth Connection

   

 When the controller and motor are turned on at the same time, Bluetooth 

will be paired automatically, and the indicator light flashes quickly. After 
successful pairing, the indicator lights of the controller and the motor are 
always on. After the controller is turned on for 60 seconds, it will stop 
searching for Bluetooth without pairing. If the pairing fails, you need to 
restart the Bluetooth search function of the controller. (Restart the Bluetooth 
search function of the controller/pair a new motor: make sure that the 
controller and the motor have been activated, and then see Table 2-

)

4. Calibration

    

(1) Press the ON/OFF button of the Bluetooth controller once, then 

press it again and hold until the motor rotates.
    (2) 

Press and hold the button on the bottom of the motor for three 

seconds until the motor rotates.

*1.The recommended control distance of the controller is about 100 meters, although the actual control 
distance can be affected by environmental factors.

  2. In an environment with strong signal interference, the motor and controller will occasionally be disconnected. 
It is recommended to shorten the operating distance. After the signal returns to normal, the motor and controller 
will automatically restore the connection.

(2) Press the button 
for three seconds.

Bluetooth 
controller

Motor

(1) Press the button once,  
then press it again for three 
seconds.

Press the ON/OFF button.

Plug in the
battery.

Searching  Bluetooth

Connect successful

Not 

Blinking

Light

 

Blinking fast

Light

Summary of Contents for Live Air 2S












Reviews: