KMS pdqSMART INSTALLATION INSTRUCTION
I4704 Rev2 – 5/22/20
5. INSTALL INSIDE TRIM AND
BATTERIES
Plug reader wire into socket on control
board on back of escutcheon, route wire
through hook in mounting plate as
shown, install escutcheon onto door.
Take care to keep from pinching wire.
Verify that thumb turn properly operates
deadbolt latch.
Secure escutcheon with (2) M4x12 Pan
head screws.
Install batteries and battery cover with
M3x18 pan head screw.
WIRE ROUTING
BATTERY
COVER
READER
SOCKET
