RH/RHR
LH/LHR
SDS pdqSMART INSTALLATION INSTRUCTION
CYLINDRICAL LOCK
1. CHECK HANDING OF LOCK
If handing of lock is not correct for opening, see next
page for handing instructions.
3. INSTALL OUTSIDE TRIM /
CHASSIS ASSEMBLY
Install escutcheon/chassis assembly from
outside of door – feeding wires through
chassis hole in door.
2. PREPARE DOOR &
INSTALL LATCH
Prepare door according to template.
Install latch, radius toward door frame
Secure with (2) #8 x ¾” combo screws.
4. INSTALL INSIDE
MOUNTING PLATE
Install inside mounting plate and
secure with (2) #10-32 x 1-7/16" flat
head screws.
88328 Rev1 – 5/22/20
READER
WIRE
CHASSIS
WIRE
Phone: 866-874-3662 | www.pdqlocks.com
