Source Viewer
QT
RACE
-
U
SER
M
ANUAL
© 2018 PDQLogic Ltd.
QTrace User Manual Rev 1.01
Page 20
Figure 17 ITM debug window
The ITM debug window toolbar buttons are summarised below:
Button
Description
Clear debug window
Copy selected line to Clipboard
Copy all lines to Clipboard
Save debug buffer to log file
Stop debug window being updated
(changes to ‘Enable’ when pressed)
Table 7 ITM debug window buttons
Figure 18 shows the settings associated with the ITM debug window. These are accessed from the ITM
Debug tab in the Settings / Status window in the Source Viewer and are summarised in Table 8.
Figure 18 ITM debug settings
Setting Description
1
Enable / disable ITM debug function
2
Number of lines that the debug window can display
3
Wrap lines when they exceed 256 bytes or discard bytes
4
Select the character which will terminate a line
5
Optionally clear the window when the target is reset
6
Size of circular buffer used to store received debug
characters (also sets max. log file size)
7
Path to store time stamped debug logs when the save
button is pressed in the debug viewer
Table 8 ITM debug settings summary